23
R/B GAIN
R GAIN :+000
B GAIN :+000
°°
°°
DTL
DTL :ON
TOTAL DTL LVL :+00
H DTL LVL :11
CRISP :02
LVL DEPENDENT :2
PEEK FREQUENCY :10
KNEE APERTURE :ON
KNEE APA.LVL :10
SLIM DTL :OFF
DTL(+) :+00
DTL(-) :+00
DTL CLIP :0
DTL SOURCE :(B+G)/2
°°
°°
Setting of Menu Items
!
Maintenance menu
4
Gain adjustment menu
The gain of R, B GAIN is adjusted.
The difference from the state of being
white-balanced can be adjusted.
• The numeral value displayed after
normal ending of AWB is “0” for both
of R, B.
5
Detail adjustment menu
DTL:
Setting of valid/invalid of detail
function.
TOTAL DTL LVL:
Horizontal and
vertical detail level adjustment.
H DTL LVL:
Horizontal DTL component
is adjusted independently of DTL
adjusted by TOTAL DTL.
CRISP:
It functions to eliminate slight
detail component and to reduce the
noise level.
LVL DEPENDENT:
It suppresses the
detail of low brightness level. The
brightness level to be suppressed is
adjusted here.
PEAK FREQUENCY:
It lifts up the
detail component, and selects the
central frequency.
KNEE APERTURE:
It functions to
emphasizes the detail component of the
portion with knee applied.
KNEE APA.LVL:
It sets the degree of
knee aperture.
SLIM DTL:
It validates the function of
slimming the portion where the detail is
thick and emphasized.
