Panasonic AK-LZ20M85G, Руководство по эксплуатации

Страница: 8 / 20

7 (E)
Installation

Mounting the lens on the camera

Before mounting the lens on the camera, make sure
that the camera’s power is turned off.
1
Position the camera horizontally or tilt it up slightly.
2
Turn the bayonet ring of the camera counterclockwise.
3
Remove the dust cap from the lens.
Be sure to keep the removed dust cap in a safe place so
as not to lose it.
Note
4
Align the positioning pin on the lens mount with the
slot on the camera mount and press the lens into the
camera mount surface.
Positioning pin
5
Turn the bayonet ring clockwise until the lens mount is
firmly fixed in place.
Camera
6
Connect the pigtail cord connector on the back of the
drive unit to the iris connector on the camera head.
Control cable
Pigtail cord
connector
Caution
Never hold the lens, lens housing and band portion to
support the entire weight of the camera. Excessive force
to the mount portion and housing of the lens may result in
damage to the lens mechanism.
A master key mark is provided on the pigtail cord
connector. Connection can be performed smoothly by
aligning the master key mark on the camera connector
with this mark. For details on installation, refer to the
camera’s Operating Instructions as well.
Note
7
Connect a control cable from the rear of the lens drive
unit to the zoom/focus connector on the camera head.
When the pan-tilt head is used, connect it to the pan-tilt
head.