Panasonic AK-HVF931AEA, Руководство по эксплуатации

Страница: 5 / 12

5
UP tally lamp
When the UP tally selector switch is at ON, this lamp
lights when the red tally signal is input.
The tally number sticker supplied can also be attached to
the lamp.
UP tally selector switch [UP TALLY]
This is used to turn the UP tally lamp to low, high or OFF.
VF tally selector switch [VF TALLY]
This is used to turn the VF tally lamp to low or high.
Aspect ratio selector switch [ASPECT]
This is used to switch the aspect ratio of the LCD screen
from 16:9 to 4:3 or vice versa.
When it is set to “R” (REMOTE), the aspect ratio is
automatically switched from 16:9 to 4:3 or vice versa by
the control on the camera.
Video format selector switch
This is used to select the video format from 1080/60i,
1080/50i or 720/60P.
Power switch [POWER]
This is used to turn the power ON or OFF.
PAN LOCK lever
This is used to secure the unit at the desired angle for
panning.
Camera I/F connector
This D-Sub connector is used for Multi-format camera
(AK-HC930, AK-HC931) interface.
Pin # Signal
1 VF-YOUT
2 VF-PBOUT
3 VF-PROUT
4
5 12C_DATA
6 R_TALLY
7 TA_TALLY
8
9 LCD+12V
10
11 VF-YOUT_GND
12 VF-PBOUT_GND
13 VF-PROUT_GND
14 AGND
15 DGND
16
17 UNREG_GND
18
19 F_GND
20 LCD_ACT
21
22
23 PEAKING_CONT
24 I2C_CLK
25 G_TALLY
26 VF_P_REQ
27
28
29
Parts and their functions