Menu operations
27
[ASSIGN] setting ([ASSIGN] condition display)
[ FOCUS-IN-R ]
15
<SELECT> dial button
<MENU> button
1
Select the function to be assigned to the <SELECT> dial button with [MAIN MENU]
→
[FUNCTION]
→
[ASSIGN].
2
Press the <SELECT> dial button.
3
Press the <MENU> button to close the menu.
4
Turn the <SELECT> dial button to change the setting.
The function that is being operated and its adjustment value are displayed.
f
This display disappears after approximately two seconds of inaction.
Key lock setting
Operation of the <F1> to <F3> buttons, <SELECT> dial button, and <MENU> button can be disabled.
The <POWER> button, <BRIGHT> knob, <CONTRAST> knob, and <PEAKING> knob cannot be disabled.
<SELECT> dial button
<MENU> button
<F1> to <F3> buttons
(Key mark)
1
Press the <SELECT> dial button while operating to display the mode check display, and then press and hold the <MENU> button
for three seconds or longer.
A key mark is constantly displayed at the top left of the screen while in key lock.
f
The setting is cleared when the power is turned off.
f
To clear the key lock, press and hold the <MENU> button for three seconds or longer.
Menu structure
[MAIN MENU]
[MARKER]
Performs the setting regarding the marker.
[FUNCTION]
Performs the setting regarding the operation of the <F1> to <F3> buttons.
[VIDEO CONFIG]
Performs the setting regarding the screen.
[SYSTEM CONFIG]
Performs the setting regarding the system.
[HOURS METER]
Displays the elapsed time and illuminated time of the backlight.
[TALLY BRIGHT]
Sets the brightness of the up tally lamp and front tally lamp.
[FOCUS ASSIST]
Sets the function of the focus assist.
