Preparation
21
Preparation
Mounting to the camera
Lock release button
Connector cover
Fig. 1
Fig. 2
Viewfinder
V-shaped projection
V-shaped groove
1
Turn off the power of the camera and this unit.
2
Press the lock release button on the camera and remove the connector cover. (Fig. 1)
3
Align the V-shaped projection of this unit to the V-shaped groove on the camera, and slide and push in until it is locked. (Fig. 2)
Once the mounting is completed, confirm that the viewfinder is securely mounted to the camera and the <FRICTION> and <TILT LOCK> knobs are
locked.
@
@
NOTE
t
Do not hold on the hood of this unit when mounting.
Dismounting from the camera
1
Turn off the power of the camera and this unit.
2
Slide and dismount this unit while pressing the lock release button on the camera.
After dismounting the unit, attach the connector cover to prevent dusts, etc. from entering in the D-sub connector.
@
@
NOTE
t
Do not hold on the hood of this unit when dismounting.
