Panasonic AK-HC3500P, Руководство по эксплуатации

Страница: 40 / 44

40
Specifications
Power supply: DC 1 V
(when external power is supplied)
AC 150 V - 40 V
(when CCU is connected)
Power consumption: 8 W (during external power
supply operation, camera only)
34 W (when CCU is connected)
indicates safety information.
Ambient temperature range:
14 °F to 113 °F (–10 °C to +45 °C)
[Preheating required at temperatures
below 3 °F (0 °C)]
Storage temperature range:
–4 °F to 140 °F (–0 °C to +60 °C)
Operating ambient humidity:
Less than 85 %
Weight: Approx. 10.36 lbs. (4.7 kg)
Dimensions: 5-5/16˝

10-1/4˝

14-3/16˝
(W

H

D) (135

60

360 mm)
[excluding protrusions]
Basic items
1) Pickup device:
/3˝ . million pixel IT-CCD

3
) System: GBR pickup system
3) Color separation optical system:
f/1.4 prism
4) Optical filters: CC: 300K, 4300K, 6300K, Cross,
Diffusion
ND: CAP, Through, 1/4, 1/16, 1/64
5) Lens mount: Bayonet type
6) Output standard: SMPTE 9M
7) Sensitivity: f/10.0, 000 lux, 300K,
white reflectance 89.9 %
(Vertical frequency: 59.94 Hz)
8) Horizontal modulation:
More than 50 % (7.5 MHz)
9) S/N ratio: 60 dB typ. (Y: 30 MHz)
10) Horizontal frequency:
33.716 kHz, 115-line frame
(Vertical frequency: 59.94 Hz)
8.15 kHz, 115-line frame
(Vertical frequency: 50 Hz)
11) Vertical frequency:
59.94 Hz or 50 Hz, interlace
Input/output signals
1) MIC input:
–0, –30, –40, –50, –60 dBm
(XLR 3-pin female

)
Gain selected by camera menu
) INCOM: 0 dBm/600 ohms
(XLR, 5-pin female

)
(Mixing is controlled separately for
PGM1 and PGM.)
3) HD-SDI1/HD-SDI output:
HD signal = 0.8 Vp-p, 75 ohms (BNC)
The HD-SDI signal output can be
added to the regular images using the
camera menu item setting and switched
to the VF or RET image output.
4) Prompt output: VBS signal = 1 Vp-p, 75 ohms (BNC)
G/L input: Tri-level SYNC or black burst (BNC)
Selected using a switch.
5) HD RET input: HD analog signal = 1 Vp-p, 75 ohms
(BNC)
Prompt output: VBS signal = 1 Vp-p, 75 ohms (BNC)
Down converter output:
VBS or D1 signal = 1 Vp-p or 0.8 Vp-p,
75 ohms (BNC)
Input or output can be selected using
the camera menu item setting.
Control
1) Power selection: EXT, OFF, CCU
) USER 1, , 3: Functions specified by menu items can
be allocated to the switch.
3) RET A/B selection:
For selecting the return signal
4) Monitor selection: Y/C, NAM, R, G, B
5) RET, PTT SW: RET, PTT
6) Gain selection: LOW, MID, HIGH
7) Output selection: CAM, BAR, TEST
8) White balance mode:
A, B, preset
9) Shutter speed selection:
1/100, 1/15, 1/50, 1/500, 1/1000,
1/000
10) AWB, ABB settings
11) Menu selection
1) CALL SW
13) INCOM: MIC ON/OFF, receive or PGM level
14) MIC setting: MIC power, MIC gain, MIC1 selection
15) Optical filter setting:
REM, LOCAL selection and LOCAL
setting
16) Back light SW: ON/OFF
* When the CCU is connected, the selection functions
for 6) to 10) are not effective.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.