76
Adjustments and Settings for Recording: Viewfinder Screen Status Displays
Information Item
Indication
Status
1. System mode
1080-59.9i
1080-23.9PsF
1080-24.0PsF
1080-50i
720-59.94P
720-60P
720-50P
This indicates the mode that the unit operates in.
1080-59.94 interlace mode
1080-23.98 segment frame mode
1080-24 segment frame mode
1080-50 interlace mode
720-59.94 progressive mode
720-60 progressive mode
720-50 progressive mode
2/43.
Frame number
for shooting and
recording
P:
i
At native recording
P:
PN
The shooting frame number is displayed next to the recording frame number
(including native recording) and the recording type (progressive/interlacing).
Examples: In the case of 24PN recording and 12 frame shooting, “12P:24PN”
is displayed.
In the case of 12P Over 59.94i, “12P:60i” is displayed.
When the VFR function is “ON”, the shooting frame number is displayed with
black and white reversed. When operating in SYNCHRO SCAN mode, the
shooting frame number blinks.
3. REC FORMAT
DVCPROHD
AVC-I100
AVC-I50
This indicates the recording mode.
Note
DVCPROHD is also displayed in the native recording.
DVCPRO HD recording (including native recording)
AVC-Intra100 recording
AVC-Intra50 recording
4/41.
Shutter speed/
mode
X
1/
. ,
X
. d
XX
1/
.
1/50 (1/60) - 1/2000,
HALF,
. d
This indicates that the shutter speed is set to SYNCHRO SCAN.
This indicates that the shutter speed is set to SYNCHRO SCAN2.
This indicates that a fixed shutter speed has been set.
5. P2 card remaining
free space
min
The indication “
min” stays illuminated under normal conditions or blinks
when the remaining level is near zero.
END
When the card space is used up, “END” blinks.
WP
WP is illuminated when the P2 card is write-protected.
LOOP
LOOP is illuminated when the LOOP REC mode is set. When loop recording
cannot be performed, for example because the P2 card has no free space, the
indication blinks.
INFO P2
P2 card being recognized.
/
Total free space/capacities of the P2 cards (when MODE CHECK is being
performed).
Note
When the menu option P2CARD REMAIN is set to “ONE-CARD”, the number
of the P2 card slot that contains the target card is indicated, together with the
remaining space.
For more information, see [P2 Card Remaining Free Space/capacity Indication]
(page 82).
With lower frame rates under VFR operation during native recording, the
display period may lengthen for the indication that little space remains on the
P2 card.
6. P2 card remaining
free space (when
MODE CHECK is
being performed)
min
The number of the P2 card slot that contains the target card and the remaining
free space are indicated (when MODE CHECK is being performed). In LOOP
REC mode, an indication of estimated recording time appears. For more
information, see [Loop Recording] (page 40). This indication also appears
when the target P2 card has been switched with a user button.
Note
Under VFR operation in native recording, the amount of free space increases
as the frame rate is lowered.
7. Unit REC indication
REC
When an external device is controlled through the 1394 connection (when the
1394 CONTROL option is set to “BOTH”), the recording status of the unit is
displayed using characters. The indication stays illuminated during recording.
This is displayed when the menu option REC TALLY of the <OPTION MODE>
screen is set to “CHAR”.
This can also be displayed during the recording using the unit alone.
This is displayed when the menu option REC STATUS of the <VF
INDICATOR3> screen is set to “ON”.
AJ-HPX2700G-VQT1V27_eng.book 76 ページ ２００８年９月２日 火曜日 午後５時４３分
