Panasonic AJHD1700 - HD VTR W/24P Скачать руководство пользователя

Страница: 13 / 134

Front panel

TRIM buttons
These buttons are used to make fine adjustments to the
IN or OUT point.
By pressing the

button while the IN button or OUT

button is held down, the registered edit point can be
adjusted in 1-frame increments. When the

button is

pressed, the point is moved ahead by one frame;
conversely, when the

button is pressed, it is moved

back by one frame.
The playback phase can be adjusted by pressing the

button while holding down the PLAY button.

REW button
When this button is pressed, the tape is rewound.
The rewinding speed can be selected using setup menu
item No.102 (FF.REW MAX).

STOP button
When this button is pressed, the tape stops traveling, and
if TAPE is selected as the

OUTPUT setting on the

<HOME> menu, still pictures can be monitored.
Even in the stop mode, the drum continues to rotate, and
the tape remains tightly wound around the drum.
Therefore, when the VTR is left in the stop mode beyond
a specific period of time, it is automatically set to the
standby OFF mode in order to protect the tape. The VTR
is set to the stop mode immediately after the cassette has
been installed.

FF button
When this button is pressed, the tape is fast forwarded.
The fast forwarding speed can be selected using setup
menu item No.102 (FF.REW MAX).

EDIT button
This button is pressed together with the PLAY button
during playback to initiate manual editing.
When the button is pressed in the stop mode, the input
signals in the mode selected by the <ASSEMBLE> menu
or <INSERT> menu can be monitored in the E-E mode.

Parts and Their Functions

When the STOP button is pressed, the original picture
and sound are restored.
During playback, search, fast forwarding or rewinding, the
input signals in the mode selected by the <ASSEMBLE>
menu or <INSERT> menu can be monitored in the E-E
mode while the button is held down.
<Note>
No guarantees are made for the sound played back in the
search mode.

PLAY button
Press this button to start playback.
When  this  button  is  pressed  together  with  the  REC
button,  recording  starts;  when  this  button  is  pressed
together with the EDIT button during playback, manual
editing starts.
However, manual editing will not be initiated if the servo
is not locked. When  only  the  PLAY  button  is  pressed
during manual editing, editing is exited, and the playback
mode is established.

REC button
When this button is pressed together with the PLAY
button, recording starts.

SERVO lamp
This lamp lights when the drum servo or capstan servo
locks.

REC INHIBIT lamp
This lights or goes off in accordance with the status of the
accidental erasure prevention tab on the cassette tape
and the setting which has been selected for

REC

INH on the <HOME> menu. Recording onto the tape is
inhibited while the lamp is lighted.

POWER OFF

HEADPHONES

PUSH
LOCK

FULL

CH CONDITION

MONITOR

FULL/FINE

REMOTE

9P50P

RS-232C