Panasonic AJHD1200AP - DVCPRO HD VTR, Руководство по обслуживанию

Страница: 382 / 647

INF-46
11. Service Menu
11-1. Service Menu Operation
1. Set the pin 2 of SW1 on the VOUT_SYS Board to the “ON” position.
2. Set the “LOCAL/MENU/REMOTE” [1] switch on the Front Panel to the “MENU” position.
3. Turn off the “REC INHIBIT” [2] on the Front Panel.
4. Select the item of the “MAIN MENU”.
“DOWN” Button [3] : Cursor (*) on the monitor moves to up direction.
“UP” Button [4] : Cursor (*) on the monitor moves to down direction.
“MODE” Button [5] : Menu changes to the direction of Main menu to sub menu.
“REC INHIBITS” Switch [2] ---- ON: Menu operation becomes effective.
“REC INHIBITS” Switch [2] ---- OFF: VTR operation becomes effective.
5. Select the item of the “SUB MENU”.
“DOWN” Button [3] : Cursor (*) on the monitor moves to up direction.
“UP” Button [4] : Cursor (*) on the monitor moves to down direction.
“PAGE” [6] + “MODE” [5] Buttons: Menu changes to the direction of Main menu to sub menu.
“-“ Button [7] : Data value is decreased.
“+” Button [8] : Data value is increased.
6.
Set the “LOCAL/MENU/REMOTE” [1] to the “LOCAL” or “REMOTE” position and then set the DIP switch
(SW1-2) on the VOUT_SYS Board to the original position (OFF).
(F4) VOUT/SYS Board
Mechanical Chassis
Front Panel
Power
Supply
Unit
Component Side of VOUT_SYS Board (F4)
SW1
1 2
ON
OFF
1
2
3 4 5 6 7 8
Factory setting Service Menu
SW1-1 OFF ---------
SW1-2 OFF ON