Panasonic AJHD1200AP - DVCPRO HD VTR, Руководство по обслуживанию

Страница: 244 / 647

INF-22
9-1-3. Microcomputer Flash ROM Version Upgrade Procedure (1)
< SERVO Microcomputer >
1. Copy the Servo program software as shown in table 9-1A-2 into the personal computer.
For your reference, an extension of Servo program software is different from others such as AV_ DV,
SYS_IF and 1394 IF.
2. Turn on the VTR power.
3. Execute the VSI2312M. exe so that the screen as shown in figure 9-1C-1 appears and then select the
“CPU” sheet.
Figure 9-1C-1
4. Select the each item on the Setup Panel as shown in the table 9-1C-2.
(3) Writing data Board Name
Name of Microcomputer (1) Microcomputer
Select
(2) Software
Select
FILE
data FILE
Extension
(4) Target
machine
ID check
SERVO Board
SERVO (Under Mech) MN10300 Series Don’t select
any one. EX .ex off
Port COM1 Baud Rate 115200
Stop Bits 1Bit Byte size 8Bits
(5) Setting for PC
Parity None
* The numbers (1) – (5) in the above tables show the number in figure 9-1C-1 (Setup Panel).
Table 9-1C-2
Select CPU.
(1)
(2)
(3)
(4)
(5)