52
INTERVAl REC/PRE
RECORDING
indication
i
iREC (blink)
iREC (blink)
__
h
__
m/
__
s
P-REC (blink)
Displayed when the REC button is disabled before the start or after the end of
INTERVAL REC mode.
Displayed during INTERVAL REC operation.
Displays the pause time before the next recording during INTERVAL REC.
Indicated while pre-recorded video and audio are being recorded on the P2 card.
ID record indication
ID
The ID is set to be superimposed on the video from the camera.
Battery type
PRO14 - AC_ADPT
Battery type, selected through a menu option. When the AC adapter is connected,
it is indicated as AC_ADPT.
Battery remaining
level/voltage
__
.
_
V
___
%
EMP
MAX
Battery remaining level in tenths of a volt
Digital battery remaining level, as a percentage
Digital battery empty.
Digital battery fully charged.
Camera-recorder
REC indication
REC
When the AJ-SPX900E is used as a system camera using a 26-pin extender or
Triax, the recording status of the camera-recorder is displayed using characters.
The indication stays illuminated during recording. This is displayed when the menu
option REC TALLY of the SYSTEM MODE is set to “CHAR”.
This can also be displayed during the recording using the AJ-SPX900E alone.
This is displayed when the menu option REC STATUS of the VF INDICATOR2 is
set to “ON”.
P2 card remaining
free space
___
min
END
WP
LOOP
INFO P2
_
/
_
The indication “
___
min” stays illuminated under normal conditions or blinks when
the remaining level is near zero.
When the card space is used up, “END” comes on.
The P2 card is write-protected.
The camera-recorder is in LOOP REC mode. When loop recording cannot be
performed, for example because the P2 card has no free space, the indication
blinks.
P2 card being recognised.
Total free space/capacities of the P2 cards (when MODE CHECK is being
performed).
<Note>
When the menu option P2 CARD REMAIN is set to “ONE CARD”, the number of
the P2 card slot that contains the target card is indicated, together with the
remaining space.
For more information, see [P2 Card Remaining Free Space/capacity Indication]
(page 53).
P2 card remaining
free space (when
MODE CHECK is
being performed)
___
min
The number of the P2 card slot that contains the target card and the remaining free
space (when MODE CHECK is being performed) are indicated. In LOOP REC
mode, the minimum guaranteed recording time is indicated. This indication also
appears when the target P2 card has been switched with a user button.
The minimum guaranteed recording time refers to the sum, at the time loop
recording is stopped, of the remaining free space of available P2 cards, except for
the card with the largest remaining free space.
Example:
If three P2 cards are available, with remaining space of eight minutes,
five minutes and two minutes respectively, then the minimum
guaranteed recording time is seven minutes.
D.ZOOM
DZ
Camera-recorder in digital zoom mode. Note that the indication blinks while the
camera-recorder is in FOCUS mode.
Super iris ON/super
black ON
S
B
SB
Super iris ON.
Super black ON.
Super iris and super black both ON.
Color temperature
_
.
_
K
Color temperature assigned to A, B, and PRE of the WHITE BAL switch (this is a
value stored at AWB performance or a value set through the menu option). The
indication is not provided in ATW mode.
Shutter speed/mode
1/
__
.
_
1/60 - 1/2000
SUPER V
Shutter speed set to SYNCHRO SCAN.
Shutter speed fixed.
Shutter speed set to SUPER V (high vertical resolution mode).
Information Item
Indication
Status
#,52:''PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧟㧞ᣣޓ᳓ᦐᣣޓඦᓟ㧡ᤨ㧞㧜ಽ
