79
7
Chapter 7 Menu description tables
CONTENTS
TAKE TOTAL TIME
NONE
:
5day
For setting the time required for shooting.
Select a setting from NONE (shooting
continues until it is stopped manually) to
5DAY (5 days).
NEWS REC MODE
(AJ-YA903G not
installed)
OFF
0.2SEC
:
2.0SEC
For setting the NEWS REC time.
Item
Variable
range
Remarks
INTERVAL REC
MODE
ON
ONE SHOT
OFF
For setting the INTERVAL REC function.
ON (MEMORY):
Interval recording is possible in single-
frame units using memory (AJ-YA903G
installed).
The recording time is 2 seconds or more
for interval recording when memory is not
used (AJ-YA903G not installed).
ONE SHOT:
Recording is performed only once for the
time set in the REC TIME item, after which
it stops.
OFF:
Interval recording is not performed.
REC TIME
00s01f
:
59s24f
For setting the recording time (for one cut).
The shortest possible recording time when the
memory is not used is 2 seconds.
PAUSE TIME
00h00m00s01f
:
00h04m59s24f
:
23h59m59s24f
For setting the recording pause time.
TOTAL REC TIME
00m00s01f
:
180m00s00f
OVER 100min
NONE
For displaying the total recording time. The
setting for this time cannot be changed.
The total time yielded by adding the REC
TIME, PAUSE TIME and TOTAL TAKE TIME
is displayed.
AUDIO REC
OFF
ON
For setting whether or not to record the
sound.
PRE REC MODE
(AJ-YA903G
installed)
OFF
0SEC
:
7SEC
:
15SEC
For setting the PRE REC function.
OFF:
The PRE REC function is not
operable.
0-15SEC:
The duration for which pre-
recording can be performed after
the REC START button is pressed
is set here.
RETAKE MODE
ON
OFF
For selecting whether or not to allow retake
operations (MODE CHECK RET
switch).
Item
Variable
range
Remarks
VIDEO OUT SEL
VBS
VF
SDI
VBS:
Normal composite output.
VF:
The Y signal of the viewfinder is output
as is. It is accompanied by a status
display.
SDI:
SDI output (this setting can be selected
only when the SDI option is provided).
OUTPUT CHAR
TC
STATUS
MENU
ONLY
For setting the kind of characters to be mixed
at the VIDEO OUT (ANALOGUE or SDI) and
MON OUT connectors.
TC:
The time code is displayed. (The
menu is displayed when the
menu appears.)
<Note>
The time code display position moves vertically in
accordance with the camera ID position.
STATUS:
All the same characters as the ones
superimposed on the viewfinder are
displayed. (The menu is displayed
when the menu appears.)
MENU ONLY:
Only the menu is displayed.
Normally, nothing is displayed.
MONITOR OUT
CHAR
ON
OFF
For selecting whether or not the characters
are to be superimposed onto the monitor
output signal. (The characters are the same
as the ones for the video output signal.)
ON:
The characters are superimposed.
(This item is not linked to VIDEO OUT
CHARACTER switch.)
OFF:
The characters are not superimposed.
(This item is not linked to VIDEO OUT
CHARACTER switch.)
7-2-3
REC FUNCTION
Item
Variable
range
Remarks
7-2-4
OUTPUT SEL
SC PHASE FINE
–75
:
+00
:
+75
For finely adjusting the SD phase during genlock.
<Note>
When making GENLOCK adjustments to the unit,
adjust H PHASE first, followed by SC PHASE.
Item
Variable
range
Remarks
GENLOCK
INT
EXT
26P EXT
For selecting the sync signal among the
camera signals.
INT:
For synchronizing with the internal
reference signal regardless of the
reference signal which has been
supplied to the GENLOCK IN connector.
EXT:
For synchronizing with the reference
signal which has been supplied to
the GENLOCK IN connector.
26P EXT:
For synchronizing with the signal
input via the 26-pin jack.
H PHASE COARSE
–50
:
+00
:
+50
For making coarse adjustments to the
horizontal phase when setting up a system.
H PHASE FINE
–160
:
+000
:
+160
For making fine adjustments to the horizontal
phase when setting up a system.
<Note>
This adjustment also affects the SC phase.
SC PHASE
COARSE
0
1
:
3
For coarsely adjusting the SC phase during
genlock.
7-2-5
GENLOCK
VF MODE
EE/PB
EE
EE/PB:
The images are played back in the
playback mode.
EE:
The camera images are displayed all
the time.
START DELAY
0SEC
:
10SEC
For setting the time taken until recording is to
start after the REC START button is pressed
in the INTERVAL REC mode.
