E-6
EN
G
L
IS
H
Parts and their Functions
Front Panel
(1)Power Indicator
This indicator lights up in green when the P2
drive is running.
(2)Status Indicator
This indicator lights up in green during access
to a P2 card.
<Note>
Do not remove the P2 card during access of
the card, otherwise files may be corrupted, or
the P2 card may fail.
(3)Card Slots
The P2 drive’s card slots are designed for P2
cards.
The P2 drive does not operate with cards
other than P2 cards.
(4)EJECT Button
To remove a P2 card, press this button so that
the button pops out, then press it in again.
<Notes>
z
For Windows 2000 only : Open “My
Computer” and use the right button of your
mouse to select the drive from which you
want to remove a card, then select
“EJECT” before operating the EJECT
button.
z
For Macintosh only: To remove a P2 card,
drag the icon of the P2 card to “Trash,” and
then press the EJECT button after
confirming that the P2 card icon
disappears.
Rear Panel
The picture shows the rear panel with its cover
removed.
(1)USB 2.0 connector (Type B)
This connects a USB cable. Use a USB cable
(shielded) compliant with USB 2.0.
<Note>
The P2 drive supports USB 2.0 only. It does
not support personal computers compliant
with USB 1.1. For Macintosh, USB 2.0
operations are not guaranteed.
(2)IEEE1394b connector
This connects an IEEE1394b cable.
<Note>
When cables are connected to both the USB
2.0 connector and IEEE1394b connector,
only the interface that was connected first
after turning on the power is available.
(3)DC IN 16V Socket
For external use of the P2 drive, connect an
AC adapter to this socket.
(4)DC IN 12V Socket
To use the P2 drive mounted in a personal
computer, connect one of the power supply
connectors inside the personal computer to
this socket. (See page 10)
<Note>
Do NOT supply power to both the DC IN 12V
socket and DC IN 16V socket at the same
time.
(5)Cable Clamp
Use this clamp to secure the AC adapter cable
when connecting the P2 drive to a personal
computer for external use of the Drive.
(6)Antitheft Lock
A commercially available antitheft cable can
be connected to this lock.
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
(5)
(6)
U
S
B 2.0
DC IN 16V
DC IN 12V
IEEE 1
3
94
b
P_AJ-PCD20.book 6 ページ ２００６年６月２８日 水曜日 午前９時４９分
