167
Menu : Menu Description Tables
M
enu
The ____ in the Adjustable Range column indicates the
preset mode.
MIC/AUDIO2
Items/
Data Saved
Adjustable
Range
Remarks
FRONT MIC
POWER
ON
OFF
Select the phantom power supply for the
front microphone.
– C U F –
REAR MIC
POWER
ON
OFF
Select the phantom power supply for the
rear microphone.
When OFF is selected, no phantom
power is supplied even if the REAR
AUDIO CH1 or CH2 switch is set to +48.
– C U F –
MONITOR
SELECT
STEREO
MIX
When the MONITOR switch is set to ST
(stereo), select the signal format for the
monitor output.
– C U F –
FRONT MIC
LEVEL
–40dB
–50dB
Select the front microphone input level.
– C U F –
REAR MIC
CH1 LVL
–50dB
–60dB
Select the rear microphone input level.
– C U F –
REAR MIC
CH2 LVL
–50dB
–60dB
Select the rear microphone input level.
– C U F –
REAR LINE IN
LVL
0dB
+4dB
–3dB
Select the rear line input level.
– C U F –
AUDIO OUT
LVL
0dB
+4dB
–3dB
Select the audio output level.
– C U F –
HEADROOM
18dB
20dB
Set the headroom (standard level).
– C U F –
WIRELESS
WARN
ON
OFF
Select whether or not to enable the
alarm to trigger for poor wireless
receiver reception.
– C U F –
TC/UB
Items/
Data Saved
Adjustable
Range
Remarks
TC MODE
DF
NDF
Set the time code mode.
DF:
Drop frame.
NDF:
Non drop frame.
Note
When the camera-recorder operates at
50 Hz or in 24P or 24PA mode, the non-
drop frame is always used.
– C U F –
UB MODE
USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER:
Select UB value set in the LCD
section.
TIME:
Select local time (hours,
minutes, seconds).
DATE:
Select local date and time (2 last
digits of year, month, date, time).
EXT:
When "CAM" , "VIDEO", or
"SDI" is selected in REC
SIGNAL on the SYSTEM MODE
screen, the user bits input to the
TC IN connector are recorded.
When "1394" is selected, the
user bits of signals input to the
DVCPRO/DV connector are
recorded.
If reading fails, USER value is
retained.
TCG:
TCG value enters UB.
FRM RATE:
Select the shooting information (e.g.
frame rate) for the camera. For more
information, see [
information recorded in user bits
REGEN:
Read out value stored in the
card and record value
continuously.
Note
When the camera-recorder is in 720P
mode, FRM RATE is always selected.
– C U F –
VITC UB
MODE
USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
TIME:
Select local time (hours,
minutes, seconds).
DATE:
Select local date and time (2 last
digits of year, month, date, time).
TCG:
TCG value enters UB.
FRM RATE:
Select camera shoting information
(frame rate, etc.). For more
information, see [
information recorded in user bits
REGEN:
Read out value stored in card
and record value continuously.
Note
When the camera-recorder operates in
24P, 24PA, or 720P mode, FRM RATE is
always selected.
– C U F –
TCG SET
HOLD
ON
OFF
ON/OFF switching for the feature that
always starts recording (when the power
is turned ON again) the TCG value that
was set before the power is turned OFF.
– C U F –
#,*2:2836&'DQQMࡍࠫ㧞㧜㧜㧢ᐕ㧝㧞㧝㧞ᣣޓἫᦐᣣޓඦ೨㧥ᤨ㧡㧤ಽ
