Panasonic AJ-HDP151P, Руководство по эксплуатации

Страница: 5 / 24

5
9
SD SERIAL DIGITAL COMPONENT AUDIO
VIDEO OUT connectors
When the optional HD-SD format converter board
(AJ-UDC150P) is installed in the unit, digital
component audio and video signals complying with
the SMPTE 259M-C, 272M and 294M standards
are output from these connectors.
Signals with the time code and menu contents
superimposed onto them are output from the SD
SDI OUT3 connector.
:
SD REF IN connectors and 75
Ω
termination
switch
These are the input connectors for the SD
reference video signals. Input NTSC signals
containing color burst signals.
Set the termination switch to ON for termination.
;
HD REF IN connectors and 75
Ω
termination
switch
These are the input connectors for the HD
reference video signals. Input tri-level sync signals
with both positive and negative polarities.
Set the termination switch to ON for termination.
<
HD REF OUT connector
The HD reference video signal for gen-lock is
output from this connector.
Tri-level sync signals with both positive and
negative polarities are output.
=
SD REF OUT connector
Black burst signal for NTSC gen-lock is output from
this connector.
>
DIGITAL AUDIO IN/OUT connectors
Digital audio signals complying with the AES/EBU
standards are input to and output from these
connectors.
?
ENCODER REMOTE connector
The encoder remote controller is connected here to
enable the video output signal settings to be
adjusted.
1
AC IN socket [~AC IN]
The power cable (provided with the unit) is
connected here.
2
SIGNAL GND terminal
This is the grounding terminal to reduce the noise
level.
It is connected with the signal ground terminal on
the component to which the unit is connected.
This is not a safety ground.
3
Fuse holder
This contains a 125 V 5 A fuse.
4
Cooling fan
This prevents the internal temperature from rising.
5
TIME CODE IN connector
This is the input connector for the external time
code.
6
TIME CODE OUT connector
This is the output connector for the decoded time
code.
7
HD SERIAL DIGITAL COMPONENT AUDIO
VIDEO IN/OUT connectors
These HD digital component audio and video signal
input and output connectors comply with the
SMPTE 292M standard.
Signals with the time code and menu contents
superimposed onto them are output from the HD
SDI OUT3 connector.
8
SDTI IN/OUT connectors
These input and output connectors for compressed
data comply with the SMPTE 305M standard.
Parts and Their Functions
Rear panel
PUSH
IN
OUT1
AUDIO CH1·2 CH3·4 CH5·6 CH7·8
SD REF
IN
IN
IN
OUT
HD SDTI HD SDI
OUT 3
(SUPER)
OUT 2
OUT 1
OUT 2
SD SDI
DIGITAL AUDIO
OPTION
OUT 3
(SUPER)
AUDIO CH1·2 CH3·4 CH5·6 CH7·8
OUT
HD REF
ENCODER REMOTE
TC IN
SIGNAL
GND
TC OUT
AC IN
FUSE
125V 5A
T
IN
HD REF
OUT
ON
OFF
75
≠
ON
OFF
75
≠
SD REF
OUT
3 5 6 4
1 2 ? < = 8 > 7
9 : ;