Panasonic AJ-HDC27VP, Руководство по обслуживанию

Страница: 53 / 741

INF-44
17-5. Remarks
17-5-1. Delete all cursor position data in the built-in memory
1. Open “<EDIT / DELETE>” page in CAM SERVICE level.
2. Set “ALL DATA CLEAR?” item to ON by JOG DIAL operation.
3. Set “REALY ALL CLEAR?” item to ON by JOG DIAL operation.
4. When “ALL CLR” character appears on the lower right of the screen, data deletion will be completed.
5. Close menu screen and then turn off the power of the Unit.
17-5-2. Delete registered data one by one
1. Open “<EDIT / DELETE>” page in CAM SERVICE level.
2. Select “DEFECT NO.” to desired position of cursor.
3. Set “DELETE” item to ON by JOG DIAL operation.
4. When “DELETE” character appears on the lower right of the screen, data deletion will be completed.
5. Close menu screen and then turn off the power of the Unit.
17-5-3. Change Parameter about blemish compensation
1. Open “<EDIT / DELETE>” page in CAM SERVICE level.
2. Select “DEFECT NO.” to desired position of cursor.
3. Change some parameters in “<EDIT / DELETE>” page (DEFECT COLOR, DEFECT SIZE etc.).
4. Set “CHANGE” item to ON by JOG DIAL operation.
5. When “CHANGE” character appears on the lower right of the screen, data change will be completed.
6. Close menu screen and then turn off the power of the Unit.
17-5-4. About the position inhibited to register the compensation data
Depending on the position for the blemish compensation, blemish compensation doesn’t work properly. In that
case, it display “NG” on the lower right position on the screen and inhibit registration of the blemish compensation
position. The condition “a)” is shown below.
a) : position of V CURSOR is the same line of the blemish compensated position and H cursor is +/- 2.
Figure Ble-6 The position inhibited to register the compensation data
: Registered blemish compensation position
: Registration inhibited position
a)