75
MENUS
USER1
(CAMERA)
(VCR)
This enables one function to be allocated to
the USER1 button.
$
Camera menu mode
(PUSH) AF+ZOOM:
Select this to execute one-touch
zooming.
(P41)
(PUSH) AF:
Select this to switch to auto focus mode
when the camera-recorder is operated in
the manual focus mode but only while
the button is held down.
WHITE BAL:
This works in the same way as the
WHITE BAL button when the white
balance is to be set.
(P45, P46)
AWB LOCK:
Select this to enable operations to be
performed with the white balance that
was in effect when the button was
pressed while operating the camera-
recorder in the auto white balance mode.
(P45)
BACKLIGHT:
Select this to set the backlight
compensation function to ON or OFF.
(P41)
SPOTLIGHT:
Select this to set the auto iris control for
the spotlight to ON or OFF.
REC CHECK:
Select this to perform a rec check.
(P14)
D. ZOOM:
Select this to perform digital zooming.
(P36)
WHITEFADE:
Select this to fade out the whole image
in white while the button is held down
during shooting. At the same time, the
sound is also faded out.
Conversely, fade-in in white occurs when
the button is released. At the same time,
the sound is also faded in.
BLACKFADE:
Select this to fade out the whole image
in black when the button is held down
during shooting. At the same time, the
sound is also faded out.
Conversely, fade-in in black occurs when
the button is released. At the same time,
the sound is also faded in.
PHOTO SHOT:
Select this for photo shot recording.
(P39)
INDEX:
Select this for index recording.
(P41)
SNS:
Select this to set the camera-recorder to
the high-sensitivity shooting mode.
(P37)
SW MODE screen
EVF DTL:
Select this to emphasize the outlines of
the images on the screen when the
button is pressed so that the subject
becomes easier to bring into focus. “EVF
DTL ON” appears for about 2 seconds in
the center of the screen after the button
has been pressed. However, the regular
images are what is recorded, not the
ones with their outlines emphasized.
The original images are restored by
pressing the button again. “EVF DTL
OFF” appears for about 2 seconds in the
center of the screen.
LUMI-FLICK:
Select this to make the screen flicker so
that images which will give the
impression that reels of photographic
film are turning just as they did years
ago are recorded.
AE LOCK:
Select this to set the camera-recorder to
the AE lock mode.
(P41)
$
VCR menu mode
BLANK SEARCH:
Select this to conduct a blank search.
(P52)
AUDIO DUB:
This works in the same way as the
A.DUB button on the remote control unit
when performing audio dubbing.
(P58)
INDEX:
Select this for index recording.
(P41)
USER2
(CAMERA)
(VCR)
This enables one function to be allocated to
the USER2 button.
For further details, refer to the USER1 item.
$
Camera menu mode
(PUSH) AF+ZOOM, (PUSH) AF, AWB LOCK,
BACKLIGHT, SPOTLIGHT, REC CHECK,
D. ZOOM, WHITEFADE, BLACKFADE,
PHOTO SHOT, INDEX, EVF DTL, LUMI-FLICK,
AE LOCK
$
VCR menu mode
BLANK SEARCH, AUDIO DUB, INDEX
USER3
(CAMERA)
(VCR)
This enables one function to be allocated to
the USER3 button.
For further details, refer to the USER1 item.
$
Camera menu mode
(PUSH) AF+ZOOM, (PUSH) AF, AWB LOCK,
BACKLIGHT, SPOTLIGHT, REC CHECK,
D. ZOOM, WHITEFADE, BLACKFADE,
PHOTO SHOT, INDEX, EVF DTL, LUMI-FLICK,
AE LOCK
$
VCR menu mode
BLANK SEARCH, AUDIO DUB, INDEX
Menu configuration
(cont.)
The underlining indicates the factory setting.
Item/
(Display
mode)
Description of settings
Item/
(Display
mode)
Description of settings
