Panasonic AG-VF5P, Руководство по обслуживанию

Страница: 21 / 64

DIS - 4
<Caution for the installation of the CRT Ass'y>
Twist lines from CRT (green/yellow and
gray) 2 times to the direction of the arrow,
and then insert into connector.
Turn red and blue lines under CRT, and
then insert in the Rear C.B.A..
Hold tight
The lines of CRT socket must be here when
rotated to downward.
<Important for safety>
To confirm the insertion and hooking of anode line to CRT, make sure before taping up
that anode line does not come off by pulling anode cap left and right.
After confirmation, tape up the root by holding this portion tightly so that there is no
opening or floating between anode cap and CRT.
3cm
Taping all lines in this place
Green/Yellow line from CRT
25mm
Red/ Blue line from CRT
35mm
Gray line from CRT mask.
The end of taping must be in this place.
If there are lines that are too
long, adjust by pulling toward the
direction of the arrow.