ELE-1
When an electrical adjustment is executed, the PC EVR software is used.
When the PC EVR software is used, the following tools are required.
NAME Part
Number
Pcs.
Remark
PC EVR
software
VVS0095
1
Download from the Global Service WEB site.
USB Driver for AG-HPX250/260 EVR Adjustment
VSI5386A 1
Download from the Global Service WEB site.
USBC cable A type
↔
mini B
---
1
Personal Computer
--- 1
*NOTE:
*OS: WINDOWS XP SP2 / SP3
This USB driver is only for Windows XP.
1. Download the file
“USB Driver for AG-HPX250/260 EVR Adjustment (VSI5386A)”
from Global Service WEB
Site and extract it.
2. This camera recorder is set to
COM
mode.
< Setting method of COM mode >
2-1.
Turn the power on and confirm that the camera recorder is set to
CAMERA
mode.
2-2.
The
COM
mode is set by hold down the
“PLAY (Tilt the operation lever in the
▲
direction)”
button,
“EXIT”
button and
“RESET”
button at the same time for three seconds or more. (The character of “COM”
blinks to the LCD screen when the COM mode is set.).
NOTE:
To cancel the COM mode, execute the operation of the same button as the setting. (Com mode cannot be
cancelled if the power has been switched off and back on again.).
3. Connect the USB cable between USB connector and PC.
1. Preparation of adjustment
1-1. PC EVR software
1-1-1. Required tools and equipment for PC EVR software
1-1-2. Installation method of USB driver
USB cable
USB connector
Mini-B
A type
