ELE-17
25. Clicking the
“Start”
button for
ND Filter3
, the camera recorder is set to ND Filter3 adjustment mode.
26. Confirm that the white level of Y signal is around 70%.
27. Clicking the
“Execute”
button for
ND Filter3
, the ND Filter3(ND 1/64) adjustment is executed automatically.
28. When the adjustment is completed, the message
“ND Adjustment END!”
is displayed in the STATUS column
on the
Adjustment Tool
screen.
29. Confirm that the vector dot is located at the zero point in the WFM (vector scope).
30. Confirm that there is no colored on Monitor TV.
31. Click the
“Set”
button for
ND Filter3
to end of ND Filter3 adjustment mode. The adjusted value is saved in
EEPROM.
Clicking the “Set” button, the adjusted
value is saved in EEPROM.
Start button
Adjustment value
R-ch Upper/Lower, B-ch Upper/Lower
Execute button
Clicking the “Set” button, the adjusted
value is saved in EEPROM.
Start button
Adjustment value
R-ch Upper/Lower, B-ch Upper/Lower
Execute button
