Panasonic AG-DVX100A - Pro 3-CCD MiniDV Proline..., Руководство по эксплуатации

Страница: 25 / 72

25
Viewfinders
Using the viewfinder
1
Set the POWER switch on the camera
recorder to ON, and check that an image
appears in the viewfinder.
O
Keep the LCD monitor closed.
2
Position the viewfinder where its screen
images can be seen most comfortably.
O
The viewfinder can be raised
perpendicularly up to angle of about 90
degrees.
3
Adjust the diopter adjustment dial in such a
way that the characters on the viewfinder
screen come into sharp focus.
4
Select YES as the setting for the EVF SET
item on the setting menu DISPLAY SETUP
screen.
O
For details on the menu operations, refer
to page 39.
Do not point the viewfinder’s eye-piece at
the sun.
This may damage the internal parts.
6
Select the EVF BRIGHTNESS item, and tilt
the OPERATION lever in the
3
or
4
direction to adjust the screen’s brightness.
(If the remote control unit is used, press the
“
M ” button among the SET buttons.)
This camera recorder has two viewfinders: a
viewfinder that uses a small LCD, and a 3.5-
inch LCD monitor.
Use the one that better suits the application and
the shooting conditions concerned.
O
The brightness and color tones may differ
between the images in the viewfinder and on
the LCD monitor and the images on a TV
monitor.
Use the TV monitor when performing the final
check of the images.
5
Select the EVF COLOR LEVEL item, tilt the
OPERATION lever in the
3
or
4
direction,
and adjust the color level of the screen. (If
the remote control unit is used, press the
“
M ” button among the SET buttons.)
Eye-piece
Diopter adjustment
dial
[–]
? ? ? ? ? ? ? ?
––––[+]
EVF BRIGHTNESS
[–]
? ? ? ? ? ? ? ?
––––[+]
EVF CONTRAST
[–] ? ? ? ? ? ? ? ? ––––[+]
PUSH MENU TO RETURN
EVF COLOR LEVEL
EVF SET
EVF COLOR LEVEL
[–]
? ? ? ? ? ? ? ?
––––[+]
[–]
? ? ? ? ? ? ? ?
––––[+]
EVF CONTRAST
[–] ? ? ? ? ? ? ? ? ––––[+]
PUSH MENU TO RETURN
EVF BRIGHTNESS
EVF SET
7
Select the EVF CONTRAST item, tilt the
OPERATION lever in the
3
or
4
direction,
and adjust the contrast of the screen. (If the
remote control unit is used, press the “
M ”
button among the SET buttons.)
EVF COLOR LEVEL
[–]
? ? ? ? ? ? ? ?
––––[+]
EVF BRIGHTNESS
[–]
? ? ? ? ? ? ? ?
––––[+]
[–]
? ? ? ? ? ? ? ?
––––[+]
PUSH MENU TO RETURN
EVF CONTRAST
EVF SET