E-37
RECORDING
– Recording method –
Main unit
Remote controller
EJECT
MENU
REW
SET
FF
PLAY
STOP
REC INH.
PAL
AUDIO
NTSC
DVCAM
PAUSE
POWER
REC
A.DUB
CH
1 / 3
2 / 4
LINE
DV
S-VIDEO
OFF
9PIN
WIRELESS
INPUT
REMOTE
MIC
AG-DV2500
PAUSE
button
STOP button
PLAY
button
REC
button
A.DUB
F.REV
INDEX
–
INDEX
+
PLAY
STOP
VEQ3533
REW
FF
PAUSE
REC
F.ADV
PLAY
button
REC button
STOP
button
PAUSE button
Memo
• If recording has been
paused for an extended
period of time, the unit
will automatically go into
the STOP mode to pro-
tect the tape.
• This unit cannot perform
editing functions.
1.
Load the cassette.
• Before loading the cassette, please check that the rear slide of
the cassette is pushed to REC.
¥
The Main unit is powered on.
2.
Start recording.
• Hold down the REC button and press the PLAY button.
3.
Pause recording.
• Press the PAUSE button.
4.
Resume recording.
• Press the PAUSE button or press the PLAY button while holding
down the REC button.
5.
Stop recording.
• Press the STOP button.
When the INDEX WRITE item of the SYSTEM menu is set as
ON, an index signal is recorded at the starting position of re-
cording.
In the PLAYBACK mode, the position where the index signal is
recorded can be detected. (Index search)
䡵
During recording, please press the REC button to record
the index signal.
* Please allow at least an interval of 1 minute between recording of
index signals.
Recording of index signals after tape recording is not possible.
Recording index signals
Memo
Audio recording level
PCM audio recording level of DV-format VTRs can be divided into 2 main groups:
1) The group that uses full scale -20dB as the standard level, to which this unit belongs.
2) The group that uses full scale -12dB as the standard level.
When a tape recorded with this unit is played on a VTR based on full scale -12dB, the volume is
decreased by about 8dB. This is not a malfunction.
