Panasonic AFPX-C30R Скачать руководство пользователя страница 389

Страница: 389 / 544

12.2.2 Master Memory Function

Overview

This function enables to transfer the data in the control unit (internal memory) such as programs to the

master memory cassette, and to copy them into another control unit (internal memory) by installing the

master memory cassette on it.

•

Following data can be transferred to the master memory cassette.

1. Ladder programs
2. System registers
3. Comments
4. F-ROM data area
5. Security information (Password or uploading disabled information)

When there is no security information, no security information exists.

Change the switch on the back of the master memory cassette

The changeover switch is located at the back of the FP-X master memory cassette (AFPX-MRTC).

The default setting is “Clock/calendar only”

Transfer from the master memory to the control unit

There are two ways to transfer data.

1. Operation using the FPWIN GR

Transferring is available in the PROG mode only.

2. Automatic transfer: when the PROG mode was changed to the RUN mode

When the power supply turns on (when started in the RUN mode)

Transferring using the FPWIN GR

1. Select [Online Edit Mode] under the [Online] on the menu bar, or press the [CTRL] and [F2] keys at

the same time, to switch to the [Online] screen.

2. Select “Internal memory => Master memory” under “Tool” on the menu bar.

Internal memory



Master memory dialog box

Select either “Internal memory => Master

memory” or “Master memory => Internal

memory”.

Transferring is available in the PROG mode only.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание AFPX-C30R

































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AFPX-C30R

Отзывы:

Похожие инструкции для AFPX-C30R

Бренды по названию

Популярные бренды

Panasonic AFPX-C30R, Руководство пользователя

Результаты поиска

Содержание AFPX-C30R

Отзывы:

Похожие инструкции для AFPX-C30R

Бренды по названию

Популярные бренды