Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R
When paging unit(s), the paged unit(s) beeps
for 1 minute.
R
If you receive an outside call while talking on the
intercom, the interrupt tone sounds (page 46).
–
Handset:
To finish intercom, press
M
OFF
N
.
To answer the call, press the corresponding
line key.
–
Base unit:
To finish intercom, place the
corded handset on the cradle. If the
speakerphone is used, press
M N
. To answer
the call, press the corresponding line key,
then lift the corded handset.
Making an intercom call
Handset
1
M
INT
N
*1
or
M
MENU
N
a
MbN
:
“
Intercom
”
a
M
SELECT
N
2
MbN
: Select the desired unit.
a
M
SELECT
N
3
When you finish talking, press
M
OFF
N
.
*1 If there is a new message in the answering
system,
M
INT
N
is not displayed.
Base unit
1
Press
M
INTERCOM
N
.
When 2 or more handsets are registered:
MbN
: Select the desired unit.
a
M
SELECT
N
R
To page all handsets, press
0
or wait for a
few seconds.
R
Lift the corded handset if needed.
2
When you finish talking, press
M
INTERCOM
N
or place the corded handset on the cradle.
Answering an intercom call
Handset
1
Press
M
N
to answer the page.
2
When you finish talking, press
M
OFF
N
.
Base unit
1
Lift the corded handset or press
M
INTERCOM
N
to answer the page.
2
When you finish talking, place the corded
handset on the cradle or press
M
INTERCOM
N
.
Note:
R
The ringer volume for intercom calls follows the
higher volume level of the 2 lines (page 46).
For assistance, please visit http://www.panasonic.com/help
31
Intercom
TG958x_0704_ver031.pdf 31
2014/07/04 10:32:26
