Panamax VT1512-IP, Инструкция по эксплуатации

Страница: 2 / 48

2
Your VT1512-IP can be controlled and monitored from anywhere in the world using the
BlueBOLT cloud interface.
On-Line Registration
– The VT1512-IP is completely plug-and-play and does not require
any software installation. The online BlueBOLT control interface is operated through an
Internet web browser.
www.panamax.com
Note: Turn off all the equipment being connected to VT1512-IP until after all the
connections (including AC). It’s recommended to turn the connected equipment back on
sequentially one unit at a time.
Insulator sheets are provided to provide electrical isolation between the unit and the
rack. The insulator sheets have adhesive on one side and are placed between the
mounting bracket and the equipment rack.
Insulator sheet
MOUNTING
VT1512-IP
ENABLED
15A
GROUND
NETWORK
Outlet 1
1
2
3
4
5
6
7
8
9
10
11
12
Outlet 2 Outlet 3 Outlet 4 Outlet 5 Outlet 6 Outlet 7 Outlet 8 Outlet 9 Outlet 10 Outlet 11 Outlet 12
POWER
PROTECTION
BlueBOLT
The enclosure includes screw-holes to install, as well as mounting brackets (0.125 inch
powder-coated steel) that secure the unit to the vertical posts of a standard equipment
rack. The brackets are able to be attached to the enclosure in multiple directions in order
to accommodate many different racks and positions.
Use the eight flat head machine screws to at attach both brackets to the VT1512-IP.
Use the four pan head screws, nuts and washers to mount the VT1512-IP to the
equipment rack.
Plan for and allow
space for cords,
plugs, wall-warts
and transformers.
A. Using any Internet connected computer go to www.mybluebolt.com using a standard
Internet browser.
B.
Follow the on-screen prompts to add a
Location
, and then to add a
Device
.
Note: MAC address information is attached to this Instruction Manual as well as on
the bottom of the VT1512-IP. It is recommended the spare MAC address label be
adhered to the unit or stored in a secure location.
C. Once you input the MAC address and included Challenge Key, if BlueBOLT cannot
detect your device (please allow up to 20 seconds), please follow the on-screen
troubleshooting guide. Also confirm the VT1512-IP is properly connected to your
networking equipment.
10 ft. power cord
BlueBOLT®
1.75
in.
1.75 in.
37 in.
Placement location should
allow the VT1512-IP to be
plugged directly into
a properly grounded
wall outlet.
VT1512-IP Instruction Manual-English