© Pan Acoustics GmbH
V 1.0
Page 19 of 22
Manual
17.4.6. Pan Net (AES/EBU) to Dante interface
[1] Pan Net Link
Via the Pan Net Link etherCON port on the loudspeak-
er, additional Pan Acoustics loudspeakers with AES/
EBU interface can be connected in daisy chain.
Attention must be paid to the correct sequence (input
/ output).
When connecting loudspeakers with AES/EBU interface
from the Pan Beam or Pan Subwoofer series, attention
must be paid to the correct connection sequence (input
/ output). If both audio channels A/B are needed on the
connected AES/EBU loudspeakers, the corresponding
cross point must be set in the Dante controller.
[1]
17.4.7. Dante LED status indicator
Above the etherCON ports for the Dante or AES67 net-
work, there are two LEDs for status indication:
The [LINK/ACT] LED is green if everything is connected
correctly.
The [1 G] LED is orange if a 1 Gigabit network has been
detected.
The [COM] LED fl ashes red if the loudspeaker commu-
nicates with the “Pan Beam Setup” software via the
Dante network.
