manualshive.com logo in svg

Pan Acoustics P 02, Руководство пользователя

Поделиться
Скачать
Pan Acoustics P 02 Скачать руководство пользователя страница 13

© Pan Acoustics GmbH   

 V 1.0    

Page 13 of 24     

Manual 

                                                                                                

The 100 V variant of the loudspeaker P 02-Pi is equipped with a 5-pin connector at the back. The 

audio signal must be connected via the enclosed connection terminal. Diff erent power taps (100%, 

50%, 25% 12.5%) can be realised via the individual pins. 

Make  the  connection  panel  accessible.  The 

connection terminal can be fi rmly connected to 

the loudspeaker enclosure using the screws in 

the terminal.

Step 1:

Insert the stripped wires into pin 1 and pin 5 of 

the connection terminal. To do this, open the 

screw  blocks  with  a  screwdriver.  After  insert-

ing the wires, close the screw blocks again and 

tighten them with a torque of 0.4 Nm so that 

the wires cannot slip out.

8.2.2. P 02-Pi (100 volts)

The wires of the connection cable must be 

fi tted with wire end ferrules.

NOTICE

8.2.2.1.  Power tapping 100%

Connection cables must not be used for fi xing or suspending loudspeakers.

WARNING

Содержание P 02

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды