ID05449 - Rev. 0.1 - 01/12/2020
35
11.3 DIN bar monitor-holder system code 7M009044
11.3.1 Technical presentation
The DIN bar monitor system consists of two curved chrome steel pipes, at the end of which
there is a clamp for the securing of any accessories. The system is completed by a horizontal
bar in chromed steel fixed to the two pipes for attachment of the monitor-holder. The monitor-
holder system is installed at the foot of the stretcher by means of the two holes for accessory
insertion. The accessory can also be used as an additional double push handle for handling of
the stretcher.
11.3.2 Intended use
The device is intended to be installed on Pam Mobility stretchers to support a monitor and as
an additional handle for pushing of the stretcher.
Environment of use: within healthcare and health facilities.
The device cannot be used in a potentially explosive or flammable atmosphere.
Personnel intended for use of the product: specialist operators and doctors.
11.3.3 Name of the parts
1. Pole;
2. Monitor-holder bar;
3. Fixing clamp;
4. Pole fixing/height adjustment lever;
5. Nylon bushing for insertion of the pole on the stretcher mesh surface.
11.3.4 Preparing the installation area
The DIN bar monitor system must be installed on Pam Mobility stretchers. It is advisable to
install the accessory before commissioning the stretcher.
5
4
1
3
2
5
4
1
3
2
