ID05449 - Rev. 0.1 - 01/12/2020
14
4.5 Control console
ATTENTION! Before carrying out any movement, consult the paragraph on the
manoeuvre to be performed.
The stretcher is equipped with a 5-button 2-function control console.
The functions of the console buttons are as follows:
A.
Raise the bed surface;
B.
Lower the bed surface;
C.
Reverse-trendelenburg adjustment;
D.
Trendelenburg adjustment;
E.
Indicator light: indicates the residual charge level of the battery;
F.
Device on button: the stretcher is in fact equipped with an auto switch off system that
activates after 1 minute of inactivity. This is to avoid unintentional activation and to preserve
battery life when not powered by the mains cable.
4.5.1 Turning on the device
To allow the device to turn on, it is necessary to first connect and turn on the battery (see
section 4.4 Battery).
Once the battery has been turned on (ON) press the button
F
and keep it pressed until the
lights
E
turn on (The activation time is approximately two seconds).
The battery charge status is displayed when one of the movement keys A, B, C or D is pressed.
When the stretcher is powered by the network cable, the console always remains active and to
make any movement it is not necessary to switch on using the button
F
.
As soon as the stretcher is connected to the network, the display E automatically switches to
"charging" mode (see para. 4.4).
