Palstar HF-AUTO, Техническое руководство

Страница: 7 / 8

Page 6 Page 7
SAVING MEMORY LOCATIONS
l
TUNE the HF-AUTO using a low power FM or CW signal
l
MANUALLY tune L&C for best SWR while power applied
l
While power is still applied push red button to the right of the tuning
knob and hold for 2 seconds or more until the display says
“SETTINGS CHANGED”
l
Remove power and release the red button
l
The frequency is now saved
l
To return to AUTO MODE push left red button
DIVISIONS IN THE FREQUENCY BANDS FOR SETTINGS
FREQUENCY IN MHZ # OF SETTINGS SPACED
1.8 MHZ to 20 MHZ 51 4 Khz
3.5 MHZ to 4.0 MHZ 51 10 Khz
7.0 MHZ to 7.3 MHZ 36 50 Khz
10.1 MHZ to 10.150 MHZ 2 50 Khz
14.0 MHZ to 14.350 MHZ 18 40 Khz
18.068 MHZ to 18.168 MHZ 3 50 Khz
21.0 MHZ to 21.450 MHZ 5 100 Khz
24.890 MHZ to 24.990 MHZ 1 500 Khz
28.0 MHZ to 29.70 MHZ 51 500 Khz
50.0 MHZ to 54.0 MHZ 101 40 Khz
MARS FREQUENCY 707 4 Khz to 500 Khz
FOR ALL TUNABLE FREQUENCIES FROM 1.8 - 30 MHZ, 40 MHZ
THROUGH 41 MHZ AND 50 MHZ TO 54 MHZ THERE ARE 1193
SUBDIVISIONS OR MEMORY POSITIONS.
REAR PANEL OF HF-AUTO
ANTENNA OUTPUTS
OUTPUT
14.200
TRANSCEIVER
FIRMWARE UPDATE/
PROGRAM SWITCH
RS-232
DC INPUT
12 - 13.8
VDC
CHASSIS GROUND
WING-NUT
@ 4 AMPS
PALSTAR