Palstar Commander VHF-1200, Руководство пользователя

Страница: 7 / 20

7
Grip the transformer by the windings, as shown.
There is not enough room for your hands inside the
cabinet if you hold it by the base.
Carefully lower the transformer into the amplifier. Be
careful not to bump the backs of the meters and be
sure the connector plug is out of the way and will not
be trapped under the transformer.
Position the transformer over the mounting holes in
the cabinet and insert the provided carriage bolts in
from the top, through the transformer mounting tabs
and chassis slots. Next, slightly lift the chassis and
place a flat washer and KEPS nut on the bottom side
of each bolt and tighten.
Plug the connector on the transformer into the one on
the wiring harness. It is keyed so that it cannot be
plugged in backwards. Make sure that the connector
halves are pressed together until the lock tabs snap in
place.
This is the final position of the transformer and the
connector plug.