Palstar COMMANDER HF-2500 EXPORT, Руководство пользователя, Страница: 4 / 30

4
Specifications
COMMANDER HF-2500/HF-2500 M
AGNUM
HF Linear Power Amplifier
•
Band Coverage:
160, 80, 40, 20, 17, 15, 12, and 10 meter amateur radio bands.
•
Types of Emissions:
SSB, FM, CW, AM, RTTY, SSTV.
•
Driving Power Required:
20 to 60 Watts nominal at rated continuous carrier output.
•
Maximum Output Power:
1500 Watts Continuous Carrier.
•
Duty Cycle: 100 percent in Amateur service at 1500 watts output power
•
Input impedance: 50 Ohm unbalanced
•
Output Impedance:
50 Ohm unbalanced: SWR 2:1 or less
•
Harmonic Suppression:
Exceeds all FCC requirements
•
Keying:
Requires contact closure of s5 VDC at 15 mA.
•
Metering: Plate voltage, plate current, grid current, and relative power
•
A.L.C.: Negative going, adjustable from rear panel
•
Front Panel Controls:
Plate metering switch; On/Off switch; Standby/Operate switch;
Tune; Load; Band selector switch.
•
Rear Panel Controls:
Tuned input adjustment; ALC adjustment; RF input; RF output;
ALC output; Keying; ground connection; AC power inlet.
•
Tube Complement: Two Eimac 3CPX800A7 pulse rated ceramic/metal triodes.
•
Cabinet Size:
18.25" W x 8.5" H x 20.75" D (46.3cm x 21.6 cm x 52.7 cm)
•
Power Requirement:
200/234 VAC, 50/60 Hz, 20 Amperes