background image

A maximum of 8 events can be programmed within a
period of one month including the present day for
timer recording.
A timer recording can be activated at the same time
on the same day every week, on every day or on
weekdays, as well as on a particular day.

Program example

Current time and date August 20, 1995 (Sunday),
10:20 am
This example records Channel 32 stored in memory
at Position 07 on Program Set No. 2 from 7:30 PM
until 8:25 p.m. on August 23rd (Wednesday).

Before programming

Check that a tape cassette with the safety tab in place
is inserted in the unit.
Check that the clock is set correctly.

Programming procedure

1.

2.

3.

4.

5.

6.

7.

8.

9.

Press the MENU button to call up the menu screen.

Press the SHIFT > button to call out the timer
program screen.

The items to set blink inverted. For each item,
press the            buttons to select the appropri-
ate data. When you press the SHIFT> button to
enter that data, the next item blinks. If there is no
need to select that item, press the SHIFT> button
to move to the next item.

Set the program set number.

Set the date.

Set the starting time.

Set the ending time.

Set the channel position. When recording an exter-
nal input source, set AU with the            buttons.

To program for another program set number, repeat
Steps 3.-7.

Press the MENU button to end the program. The
unit returns to the menu screen.

If you hold down the OPERATE/TIMER button for
more than three seconds, the unit goes on timer
standby. Check that the multi display indicator [      ]
lights up. To cancel this mode, hold the OPERATE/
TIMER button down for three seconds again. 

q

Child lock

During timer standby mode, all button functions are
blocked except MENU button. To cancel this mode, hold
the OPERATE/TlMER button down for three seconds. 

Correcting a programme

Press the SHIFT </>  buttons, during programming, to
return to the item to be corrected, then correct it by
selecting the appropriate data again with the
buttons.

Cancelling a programme

If you press the RESET button during programming, the
data for the program set number being set is cleared.

Checking a Programme

While the timer is standing by
Press the MENU button. The programme confirma-
tion screen is displayed. After checking the
programme, press the MENU button again to return
to the normal screen.
While the timer is recording
Press the MENU button. The programme confirma-
tion screen is displayed and the programme line
being recorded blinks. After checking the programme,
press the MENU button again to return to the normal
screen.

E- 17

PROGRAMMABLE TIMER RECORDING

.

.

.
.

.

NO.   DATE        START       STOP       POS
1        --------------------------------------------------
2        23/ 8         19 : 30        20 : 25      04
3        --------------------------------------------------
4        --------------------------------------------------

SELECT =[ V   ]
ENTER   =[>]
END       =[MENU] 

TIMER PROGRAM

1 2 3 4 5 6 7 8

Содержание VCR-9688




























Отзывы: