Fitting the remote control's batteries
Connecting up the video recorder
Place your video
horizontally on a flat, steady base so that air can circulate around it for ventilation
away from humidity and heat, magnetic fields, such as those from loudspeakers
etc and with no heavy objects placed on top
I
n
i
t
i
a
l
INSTALLATION
,
1.5 V (AAA)
The buttons to use
are marked on the
following pages.
AC 204 V
50 Hz
Unplug the aerial cable from your TV and plug it into the
ANT.IN" socket of the video.
Plug the short coaxial cable provided into the "ANT.OUT"
socket of the video and the aerial socket of the TV.
Plug a RCA cable into the "RCA" socket of the video and
the AV socket on the TV if available.
"
This connection will provide best picture and sound quality.
Ask your dealer for an appropriate cable if you do not have one.
Without a RCA cable
, you need to follow the steps described under
"If you are not using a RCA cable" (right page and page 17).
Make sure the rating of the household mains supply matches the
rating shown on the back of the video.
Now plug in the mains lead. The display of the video
should now light.
Fit the batteries as shown by
the pictures in the bay.
Protect your environment by returning used batteries to your dealer. Since
batteries contain toxic substances they require special disposal methods.
Make sure the batteries are always of the same type and age, and remove them
from the remote control if you are not using it for a long period.
4
