Adjusting the Picture
Adjusting the picture
23
To adjust the picture:
1
Press
6
5
to highlight an option, press
3
4
to adjust the option;
If a sub-menu exits, press
4
or
OK
to access. You can select:
Press
MENU
. The on-screen menu opens with the
Picture
menu displayed, then press
6
to access.
!
Picture Mode
— Selects the picture mode. You can select:
. Dynamic
(a bright and vivid picture)
. Standard
(a standard picture)
. Mild
(a soft picture)
. User
(user customized picture).
Note:
You can also press
P.MODE
to select the picture mode.
!
Contrast
— Adjusts the contrast.
!
Brightness
— Adjusts the brightness.
!
Colour
— Adjusts the colour saturation.
!
Sharpness
— Adjusts the sharpness.
!
Tint
— Adjusts the image tint. (Only for NTSC system)
!
Colour Temperature
— Selects the colour temperature. You
can select
Warm
(to enhance the reds),
Cool
(to enhance the
blues), or
Normal
.
!
Aspect Ratio
— Selects the aspect ratio of the picture. You
can select:
. 16:9
— Shows a full-screen picture in 16:9 mode.
. 4:3
— Shows picture in 4:3 display mode. (Recommended not
let TV remain in this mode for extended period of time as to
protect the screen.)
.
Auto
— Selects the correct aspect ratio automatically.
. Zoom1
— Enlarges the picture vertically. The top and bottom
may be cropped.
.
Zoom2
— Enlarges picture both horizontally and vertically.
The edges may be cropped.
.
1:1 pixel mapping
(D-SUB, HDMI only)
— Displays an input
source without scaling it (This option is available on either of
these two conditions:
native resolution:1920x1080, input
resolution:1920 x 1080p; native resolution:1366x768, input
resolution:1360 x768).
Note:
You can also press
ASPECT
to select the aspect ratio.
!
Noise Reduction
— Selects the noise reduction mode to
reduce picture noise (snow). You can select
Low, Middle,
High,
or
Off
.
!
Overscan
(D-SUB,HDMI only) — Turn this
On
to adjust the
picture’s reproduction rate (available when the TV’s aspect
ratio is in 4:3 or16:9 and the input signal is in video format).
!
Adaptive Contrast
— Turn this
On
to optimize the picture
display for a more vivid image.
!
HDMI Black Level
(HDMI only) — Selects the black level on
the screen. Select
Low
for darker screen,
Normal
for brighter
screen. (Available when RGB signal is input through HDMI jack).
!
Screen
(D-SUB only) — Adjusts the computer image.
1
2
Press
the
FREEZE
button
to
freeze
the
image
on
the
screen
(
the
video
sources
still
run
).
Press
again
to
restore
.
SELECT
MOVE
MENU
RETURN
Contrast
75
Brightness
45
Sharpness
50
Colour
50
Tint
50
SELECT
MOVE
MENU
RETURN
Aspect Ratio
Noise Reduction
Overscan
16:9
Middle
On
SELECT
MOVE
MENU
RETURN
HDMI Black Level
Picture Mode
User
Colour Temperature
Normal
Adaptive Contrast
On
Press
6
or
5
to
scroll the menu
In D-SUB mode, press
6
to scroll to next screen
2
Freezing the picture
Note
:
!
long
time
,
that
fixed
image
may
become
imprinted
on
the
screen
and
remain
visible
.
Therefore do not freeze the picture for a long
time.
!
In some mode, the FREEZE function can not
work.
If a fixed image is displayed on the screen for a
Screen
Normal
Channel
Lock
Picture
Option
Sound
Time
Channel
Lock
Picture
Option
Sound
Time
Channel
Lock
Picture
Option
Sound
Time