Palsonic TFTV100A, Руководство пользователя

Страница: 20 / 36

- 19 -
TV Function
EXIT TV SETUP
Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the
antenna, connect the power supply cord. If the player is in standby mode, press the
POWER button to turn on the power.
Press the TV button on the remote control or the SOURCE button on the front panel
to shift to TV mode.
Press the / (CH+/CH-) buttons to select the desired channel. Or first press the
number buttons on the remote control for input, the press the OK button for
confirmation to go to the selected channel directly, or without pressing any buttons and
wait a moment, it also goes to the selected channel.
Some preferences can be preset:
Picture Parameter Setup
Press the TV/LCD SETUP button once to enter the PICTURE setup menu, and screen
displays as shown below:
Use the / (CH+/CH-) buttons to select the item you want to set (Brightness,
Contrast, Colour).
Use the / (VOL+/VOL-) buttons to adjust the items between 0 and 20.
Use the / (CH+/CH-) buttons to select the Language, press the / (VOL+/VOL-)
buttons to select the language you prefer.
To restore a settings to the original value, use the / (CH+/CH-) buttons to select
Reset, then press the OK or to confirm the change.
First use the / (CH+/CH-) buttons to highlight the PICTURE, and press the
button to exit the PICTURE setup menu. Press the button to enter the TV Setup
menu.
PICTURE
BRIGHTNESS
CONTRAST
COLOR
LANGUAGE
RESET 10
10
10
ENGLISH