Basic Operations
(continued)
22
Select input source signal
Press the
SOURCE
button to access
source
menu.
Press
VOL+
or
VOL-
to select a desired input channel.
Press
ENTER
to confirm and the unit display signal from the
selected input channel.
A--------VGA, select signal from VGA (5-pin D-sub) terminals.
D--------DVI, select signal from DVI terminals.
C1------YCbCr1, select signal from YCbCr1 terminals.
C2------YCbCr2, select signal from YCbCr2 terminals.
AV------VIDEO (S-VIDEO), select signal from S-Video or Video terminal.
The S-Video is prior to Video terminal when they are connected at the same time.
TV------Select TV signal.
3
2
1
settings
right/left to change language
audio format
video format
language
menu background
BG
AUTO
English
opaque
Note:
This unit identifies the type of component video terminals automatically. If you connect
Y, Cb, Cr
terminals, the
screen displays
YCbCr detected
on the bottom-right corner. Similarly, if the component video terminals are
Y, Pb, Pr
, the screen displays
YPbPr detected
on the bottom-right corner.
Selecting a MENU language
Press
MENU
to display the menu main page.
Press
VOL+/-
to display
settings
menu page.
Press
CH
to select
language
item.
Press
VOL+/-
to select an OSD language.
4
3
2
1
Note:
In some models, there may be only one menu language available. In this case, the menu language may not be
adjusted by the user.
VGA
source
A
D C1 C2 AV TV
