(2)
(3)
(3)
(2)
(4)
(1)
7.6 The setting of colour and sound system
7.5 VCR
7.4.2 FINE TUNE
Press the number buttons (4) or
CH
button (3) to select the
channel you want to fine-tune.
Enter into the
PRESET
menu,
press
CH
button (3) to select
Fine tune, then press and hold the
VOL
or
VOL
button (2) to begin
fine-tune until the optimum picture
and sound is achieved.
Note:
if some channel’s colour or sound is abnormal, it may be that the setting of the colour or the
sound system is wrong, please do adjustment according to "8.6 The setting of colour and
sound system" to set the proper colour and sound system.
When receiving
VCR
programs, there may occur jump of the
picture or bend of upper picture. You can solve this problem by
activating
VCR
function. Please do the following steps:
Enter into the
PRESET
menu, press
CH
or
CH
button to
select
VCR
item, and press
VOL
or
VOL
button to set
VCR
(ON).
If you do not meet this problem, or the signal source is not
from VCR, please shut off this function.
7.6.1 Use OSD button
Press
OSD
button (1), the screen will display
position number, colour and sound system.
scan mode etc. Check whether the colour and
sound system is correct.
!
1)
2)
(1)
PAL 6.5MHz
100Hz MOVING
