Auto Search
Enter the
Program
menu and select
Auto
item.
Press
VOL+
or
VOL-
button and the
TV set starts Auto Channel Preset.
All Active channels will be preset and
stored into the memory automatically.
After presetting, the TV will stop at
the last channel program. During the
process of Auto channel preset, pressing the
MENU
or
CH+/-
button will stop the process.
Note:
Before you start Auto Search, we strongly recommend you to
set a proper Sound System according to your local area.
Please refer to the steps of Sound System setting on page 16.
Manual Search
Use manual search function if desired channels cannot be
preset or if you would like to preset channels to specific
position numbers one by one.
Please Select a channel number with
digital buttons
or
CH+/-
buttons. You
can also enter program menu, select
Display
item and adjust with
VOL+/-
button manually to select the desired
channel number (from 0~254)
14
1.
Press
MENU
button four times to display
Program
menu.
2.
Press
CH+/
- button to
select
item.
3.
Press
VOL+/-
button to
confirm
or
adjust
the selected item.
Tuning in
In
Program
menu, please select
Manual
item and start
manual search with
VOL+/-
buttons. Pressing
VOL+
, the set
searches towards higher frequency; Pressing
VOL-
, the set
searches towards lower frequency. The search stops when a
program is found and the is program will be stored in the
specified position number
You can use
Band
selection to quicken search process if you
know which band your desired program is located in. The band
switches among
VHF-L
,
VHF-H
and
UHF
.
Repeat the above steps if you want to store another program in
other position number.
2
1
3
2
2
3
3
HELP
1