Instructions for Target Mat, Crossbar & Post Assembly
* All parts are referred to by letter. Please reference image #1 for part names & letter association.
1. Connect the 2 halves of the crossbar (Part D)
using Part C. The far ends of Parts D should have
3 holes.
The middle portion of parts D will have 1 hole. This
is where Part C will connect.
Crossbar Components
A.
T-Connector – Qty. 2
B.
Connects Part A to Part D –
Qty. 2
C.
Middle Connector (Connect 2
crossbar halves) – Qty. 1
D.
Crossbar Halves – Qty. 2
2. Insert Part C into the first halve of part D by
pressing down onto the push pin. Make sure the
pin pops securely into the available hole.
3. Repeat step 2 for the second half of the crossbar.
Make sure both halves are connected securely.
End
Middle
Push Pin
800-233-5484
PalosSports.com
#PalosSports
