Palomar SSB-500, Инструкция по эксплуатации, Страница: 10 / 21

C. PUSH-TO-TALK MICROPHONE W ITH REMOTE VO LU M E
G AIN
The receiver and transmitter are controlled by the Push-to-Talk switch on the
microphone. Press the switch and the transmitter is activated; release switch
to receive. When transmitting, hold the microphone two inches from the
mouth and speak clearly in a normal voice. Rotate the remote volume -
gain knob on microphone to increase or decrease your modulation level.
The radio cornes complété with the Iow impédance dynamie microphone (sup
plied).
D . O PERATING PROCEDURE TO RECEIVE:
1. Rotate the Squelch Control to the fully counter eloekwise position ini-
tially.
2. Set the CB-РА Switch to the CB position.
3. Set the Garifier Control to the center (12 o’clock) position.
4. Set the LSB-USB-AM Switch to either AM for standard AM réception or
LSB or USB, depending on whether signal to be received is on the Upper
or Lower sideband.
5. Set the NB-OFF switch in the OFF position initially.
6. Select desired channel (1 - 40) by rotating the Channel Selector switch to
the desired position.
7. Rotate the Volume Control with Power Switch eloekwise to apply power
to the transceiver. Since the transceiver is fully transistorized, operation
will be instantaneous. Continue rotating the Volume control eloekwise to
provide a comfortable listening level.
8. If necessary, adjust RF GAIN-OFF and ANL switches for clearer
réception.
E. O PERATING PROCEDURE TO T R A N S M IT ON AM AN D SSB:
WARNING: NEVER ATTEMPT TO TRANSMIT WITHOUT AN ANTEN-
NA OR DUMMY LOAD CONNECTED TO THE TRANSCEIVER.
Before operating the transceiver, the followings MUST be done:
1. Valid Class D Citizens Band equipment license shall be posted at the main
control (fixed) station location.
NOTE: Operation under a Temporary Permit, FCC Form 555-B, which is
furnished with your SSB-500, is permissible while your regulär license
application is being processed by the FCC.
- 1 0 -