23
MAINTENANCE
OF THE LOUVRE
Use a vacuum cleaner to remove dirt from the louvre.
Make sure that the fan is not working before cleaning.
White powder may form on the louvre. Wipe off with soft cloth.
Caution
Do not press the louvre heavily. Do not apply strong pressure
to the Louvre.
The louvre may break causing discolouration of the
floor or carpet due to the change in heat discharge.
MAINTENANCE OF THE AIR FILTER
If the Air Filter lamp flashes, clean Air Filters (1) and (2)
Use a vacuum cleaner to remove dirt on the Air Filters.
Air Filter (1) could be taken off to clean. Use mild soapy water for severe dirt and refit after drying.
If Air Filter is wet, the heater may not operate correctly.
Do not remove Air Filter (2)
REMOVE THE FILTER
1. Remove the screw.
2. Hold the upper side of Air Filter (1) and pull upward. (Do not
hold and pull strongly. It may cause the air filter to break).
REFIT THE FILTER
1. Hold the upper side of the Air Filter (1) and place the filter onto
the notch
2. Tighten the screw
The heater should not be operated without the filter. Please
refit filter correctly.
Warning
