background image

 

13

 
 

WEEKLY MAINTENANCE OF THE AIR FILTER 

 

  If the Air Filter lamp flashes, clean Air Filters (1) and (2) 

  Use a vacuum cleaner to remove dirt on the Air Filters. 

  Air Filter (1) could be taken off to clean. Use mild soapy water for severe dirt and refit after drying. 

If Air Filter is wet, the heater may not operate correctly.  

  Do not remove Air Filter (2) 

 

 

 

 

REMOVE THE FILTER 

 
1. Remove the screw. 
2. Hold the upper side of Air Filter (1) and pull upward. (Do not 
hold and pull strongly. It may cause the air filter to break). 

 

 

REFIT THE FILTER 

 
1. Hold the upper side of the Air Filter (1) and place the filter onto 
the notch 
2. Tighten the screw 
 
 

 

 
Servicing Your Heater  

 
Any repair or service work must be carried out by a qualified person.  
 
We recommend that this convection heater be inspected and serviced every 12 months or prior to every 
winter season. 
 
For repairs and service please contact Rheem Service on 131 031. Rheem Service can carry out repairs and 
service on site. 
 
 
 
 

 
 
 
 

 
The heater must not be operated without the filter. Please refit 
filter correctly. 

   Warning 

Содержание PJC-C25FR





























Отзывы: