10
TEMPERATURE CONTROL – STANDARD
STANDARD CONTROLLER FUNCTIONS
If one or more controllers are installed, at least one must be on for the water heater to operate. If all
controllers are off, the water heater will only deliver cold water.
on / off
button –
This button must be pressed once to turn on the controller.
A controller cannot be turned on if water is flowing from a hot tap.
To turn off a controller, press the on / off button once. The light will go out.
A controller can be turned off whilst water is flowing.
On / off
operating light – The light in the on / off button will glow when the controller is turned on.
The light will go out when the controller is turned off.
Priority
light –
This light will glow on a controller when that controller has priority.
The Bathroom controller(s), if they are turned on, have priority over the Kitchen
controller.
Priority means that controller has control of the water heater temperature setting.
The water temperature setting can only be adjusted by the controller that has priority.
In use
light –
This light will glow on all controllers, whether they are on or off, when hot water is
flowing, regardless of which controller has priority.
Display panel
–
The current temperature setting is displayed on all controllers (whether hot water is
flowing or not), when any controller is on.
If all controllers are off, then the display remains blank.
The water volume can also be displayed on the Kitchen controller. The x10
l
symbol
glows when the water volume is displayed.
(
up
button) –
The up button increases the temperature setting (refer to
“Temperature Adjustment –
Standard Controller”
on page 13).
(
Down
button) –
The down button decreases the temperature setting (refer to
“Temperature
Adjustment – Standard Controller”
on page 13).
Water volume
button (Kitchen controller only) – This feature enables an alarm to sound when a set volume
of water has flowed through the water heater (refer to
“Water Volume Function –
Standard Controller”
on page 18).
Water volume
operating light – The light in the water volume button will glow when the water volume button
is pressed and the water volume mode is turned on.
The light will go out when the water volume button is pressed and the water volume
mode is turned off.
Water volume
symbol – The x10
l
symbol below the display panel glows when the water volume mode is
turned on and the water volume is displayed.
