PaloAlto Networks PA-5200 Seriesp, Справочник по аппаратуре

Страница: 58 / 60

PA-5200 Series Firewall Compliance Statements Overview
PA-5200 Series Firewall Compliance Statements
The following lists the PA-5200 Series firewall hardware compliance statements:
• VCCI
This secon provides the compliance statement for the Voluntary Control Council for
Interference by Informaon Technology Equipment (VCCI), which governs radio frequency
emissions in Japan.
The following informaon is in accordance to VCCI Class A requirements:
Translaon: This is a Class A product. In a domesc environment this product may cause radio
interference, in which case the user may be required to take correcve acons.
• NEBS Requirements
The following lists the Network Equipment Building System (NEBS) requirements for PA-5200
Series firewalls.
• The firewall is intended to be installed in a Network Telecommunicaon Facility (Central
Office) as part of a Common Bonding Network (CBN) or Isolated Bonding Network (IBN).
Bare conductors must be coated with an appropriate anoxidant compound before crimp
connecons are made. All unplated connectors, braided strap, and bus bars must be brought
to a bright finish and then coated with an anoxidant before they are connected.
Fastening hardware must be compable with the materials being joined and must preclude
loosening, deterioraon, and electrochemical corrosion of the hardware and the joined
materials.
• The firewall is suitable for connecon to the Central Office or Customer Premise Equipment
(CPE).
• The DC baery return wiring on the firewall must be connected as an isolated DC return
(DC-I).
The intra-building ports (RJ-45 Ethernet ports, AUX ports, HA ports, and the MGT
port) of the equipment or subassembly are suitable for connecon to only intra-
building or unexposed wiring or cabling. The intrabuilding port(s) of the equipment
or subassembly must not be metallically connected to interfaces that connect to
the Outside Plant (OSP) or its wiring. These interfaces are designed for use as intra-
building interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE,
Issue 6) and require isolaon from the exposed OSP cabling. The addion of primary
protectors is not sufficient protecon to connect these interfaces metallically to OSP
wiring.The firewall must be connected to an external Special Protecon Device (SPD)
when installed and connected to commercial AC power.
The firewall must be connected to an external Special Protecon Device (SPD) when
installed and connected to commercial AC power.
PA-5200 Series Next-Gen Firewall Hardware Reference 58
©
2021 Palo Alto Networks, Inc.