PaloAlto Networks PA-200, Справочник по аппаратуре

Страница: 14 / 20

Interpreting the Device LEDs
12 • Maintaining the Hardware Palo Alto Networks
•
Removal of equipment top cover is to be performed only by trained service person(s).
Interpreting the Device LEDs
Figure 4 shows the LEDs on the front panel of the PA-200 firewall.
Figure 4. Front Panel LEDs
Table 3 describes the LED functions and states.
Table 3. LED Functions and States
Interface State Description
POWER Green The device is powered.
Off Power is off.
STATUS Green The device is operating normally.
Yellow The device is booting up.
FAN Green The fan is operating normally.
Note: The fan is under the control of the firewall processor and may not
run all the time. This is normal.
Red The fan has failed.
HA Green This device is the current active device.
Yellow This device is the current passive device.
Off High availability is not enabled on this device.
ALARM Red There is a hardware failure, which may include power supply
detected but not working, fan failure, HA failover, or temperature
above high temperature threshold.
Off The device is operating normally.
TEMP Green The temperature is normal.
Yellow The temperature is outside the normal tolerance.