PaloAlto Networks M-300, Справочник по аппаратуре

Страница: 26 / 52

Install the M-300 and M-700 Appliance
the appliance and then connue to slide the appliance in to the rack unl the front of the
appliance is flush with the front of the rack. The inner-rail release clips are shown in step 1.
STEP 4 | Secure the front of the appliance to the rack by turning the front thumb screws on each rail
clockwise unl ght. Secure the back rail to the rack using one M5 screw (with washer) for
each rail.
Install the M-700 Appliance in a 19” Equipment Rack
The following procedure describes how to install the M-700 appliance in a four-post equipment
rack (shipped with the appliance). The rack kit includes the hardware required to install the
appliance in most equipment racks. Extra screws and washers are included.
STEP 1 | Aach the inner-rails to each side of the appliance by aligning the square holes on each
rail with the rail hooks on the appliance and then sliding the rails toward the front of the
M-300 and M-700 Appliance Hardware Reference 26
©
2022 Palo Alto Networks, Inc.