PalmSens EmStat4M, Руководство пользователя

Страница: 15 / 21

PAGE | 14
There are multiple ways to connect a sensor or cell to the EmStat4M.
Using LEMO connector on the EmStat4M module:
Or using the screw terminals on the development board:
Figure 10 - Using the screw terminals
A small screwdriver is supplied for using the screw terminals.
The SPE connector for use with Screen Printed Electrodes that have the common 2.54 mm
pitch can be screwed in directly to the screw terminals.
When using the EmStat4M HR:
In case of using the SPE connector with an EmStat4M HR, make sure the Sense is also
connected to the WE. This can be done by using a small wire and screwing it in together with
the SPE connector.