palmiye Skyroof Prestige, Руководство по установке

Страница: 36 / 50

36
5.5.1.1. Programming of Lights (Perimeter Lights)
Step 1: Give energy to control box
Step 2: Give energy for at least 4 second and you will hear a click from control box
Step 1: Power off and power on 5 times max. within 5 sec.
Step 2: Leave while power ON. The LED lights will blink within 10 sec.
Step 3: Select a channel from your remote control you desired.
Step 4: Press “PROG” button on remote control at least 2 sec.
•
The lights have stored to desired channel on your transmitter.
5.6. Resetting
5.6.1. Motor
Step 1: While provided power to ALTUS motor unplug for 2 seconds
Step 2: Plug in 10 seconds
Step 3: Unplug 2 seconds
Step 4: Plug in 10 seconds, the ALTUS motor will jog briefly
Step 5: Press and hold the PROG button on the back of Remote Control for more than 7 seconds
until the ALTUS motor jog briefly 2 times. This removes ALL memorized motor transmitters.
•
The motor has deleted on your transmitter.
5.6.2. LED Light Control Panel
5.6.2.1. RGB LED Resetting
Step 1: Give energy to control box and wait until red light is on at control box.
Step 1: Power OFF and power ON 10 times max. within 10 sec.
Step 2: Leave while power ON
* The LED lights will blink within 10 sec. Thus, the lighting control box will be reset.
•
The RGB lights have deleted on your transmitter.
5.6.2.2. Standard LED Resetting
Step 1: Give energy to control box and wait until red light is on at control box.
Step 1: Power OFF and power ON 10 times max. within 10 sec.
Step 2: Leave while power ON
* The LED lights will blink within 10 sec. Thus, the lighting control box will be reset.
The lights have deleted on your transmitter.