palmiye Skyroof Prestige, Руководство по установке

Страница: 35 / 50

35
Using a small screwdriver loosen the screws on the reverse side of the remote control and
remove the back cover.
Replace the battery with one 2430 Lithium 3V Battery.
5.5. Programming
5.5.1. Panels
Step 1: It has to be connected directly to electric power unit (120VAC/60Hz or 230VAC/50Hz).
Notice the motor will not respond to any transmitter until a transmitter is assigned to
communicate with the motor.
Step 2: Choose the channel on your transmitter that you want to set for the motor.
Step 3: Press up and down button together until the motor will jog briefly for one time.
Step 4: Check the direction. Up button ensures the collect to panels.
Step 5: Reach the back-limit position where panel side caps is mustn’t touch each other (has
to be gap at least 2cm /1”) and push MY button. Motor will stop.
Step 6: In order to set back limit, press DOWN and MY button constantly. The panels will go to
front. When the panels reach to middle of the projection press MY button.
•
Back limit position defined.
Step 7: Reach the front limit position where panels close completely and push MY button.
Motor will stop.
Step 8: In order to set front limit, press UP and MY button constantly. The panels will go to
back. When the panels reach to middle of the projection press MY button.
•
Front limit position defined.
Step 9: Press again to MY button.
Step 10: Press PROG button on your transmitter.
5.4. Replacing The Battery